Out Of Memory Message; Maximum Adf Output Tray Capacity - Brother MFC-8380DN User Manual

Chapter 5

Out of memory message

If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Start to send the
pages scanned so far, or to press Stop/Exit
to cancel the operation.
Note
• If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real Time Transmission on page 42.)
• To make extra memory available, you can
do the following:
• Print the faxes that are in the memory.
(See Printing a fax from the memory
on page 50.)
• Turn off Fax storage. (See Turning off
Remote Fax Options on page 69.)
• Add Optional Memory (See Memory
board on page 113.)
44
Maximum ADF output tray
5
capacity
If the maximum capacity of the output tray is
reached during use, the machine will stop
scanning and the LCD will show
20 Sheet Limit.
Do one of the following:
To send the pages scanned so far, press
1.Send.
To delete the scanned pages, press
2.Delete.
If you send the pages already scanned and
want to send the remaining pages, remove
the scanned sheets from the ADF output tray,
then dial the fax number and press Start.
5