Bosch Evolution HES7152U Use And Care Manual page 11

Electric ranges with european convection
Hide thumbs Also See for Evolution HES7152U:
Table of Contents

Advertisement

Available languages

Available languages

Oven Bottom
Oven Vent
Automatic Shutoff
Self-Cleaning
Indicators and Other Features
side. A second shorter item can then be placed on the half rack (above the first
shorter item). This allows for easier access to all items and better utilization of the
oven cavity.
Tip: The removable section can also be used outside of the oven as a trivet or
cooling rack.
Do not place food directly on oven bottom. Do not use aluminum foil or protective
liners to line any part of an appliance, especially surface unit drip bowls or oven
bottom. Installation of these liners may result in a risk of electric shock or fire.
Free-standing Models:
The oven vent is located below the display above the rear left cooktop element. It
is normal to see steam escaping from the vent and condensation may collect on
the backguard and cooktop. This area may become hot when the oven is in use.
Do not block the vent as it is important for air circulation.
Slide-in Models:
The oven vent is located above the oven door handle. Warm air may be released
from the vent before, during and after cooking. It is normal to see steam escaping
from the vent and condensation may collect in this area. This area may be warm
when the oven is in use. Do not block the vent as it is important for air circulation.
The oven will automatically shut off after 12 hours (24 hours if the time format is
set for 24 hour in the Select Function section).
The oven features a self-cleaning function that eliminates the manual labor
involved with cleaning your oven.
Beep - Signals that more information must be entered or confirms the receipt of
an entry. A Beep also signals the end of a program or an oven error.
End-of-Cycle Indicator - To indicate when a mode is finished, 3 consecutive
beeps will sound.
Default Settings - The cooking modes automatically select the default tempera-
ture. These can be changed when a different one is needed.
Flashing Symbol or Number - Signals an incomplete setting and calls for
another step or START to be pressed.
F Number Codes -These codes display when there is a problem with the range.
Getting Started
Figure 7: Half Oven Rack
English 9

Advertisement

Table of Contents
loading

Table of Contents