Setting Your Changes As The New Default; Restoring All Settings To The Factory Settings; Sending A Fax Manually; Sending A Fax At The End Of A Conversation - Brother MFC-685CW User Manual

Chapter 5
Setting your changes as the
new default
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Scan Size you use
most often by setting them as default. These
settings will stay until you change them again.
a
Press (Fax).
b
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press a
or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press (Fax).
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
40

Sending a fax manually

5
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a
Press
b
Load your document.
c
To listen for a dial tone do one of the
following:
(MFC-685CW)Press
Speaker Phone or pick up the
handset.
(MFC-885CW) Press
Speaker Phone on the machine.
d
Dial the fax number.
e
When you hear the fax tone, press
Black Start or Color Start.
If you are using the scanner glass press
1 to send a fax.
f
Replace the handset.
5
Sending a fax at the end of a
conversation
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Load your document.
c
Press Black Start or Color Start.
If you are using the scanner glass,
press 1 to send a fax.
d
Replace the handset.
(Fax).
5
5