Beeper Volume; Speaker Volume - Brother MFC-685CW User Manual

Beeper Volume

When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Beeper.
e
Press d or c to choose Low, Med, High
or Off
Press OK.
f
Press Stop/Exit.

Speaker Volume

3
You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Speaker.
e
Press d or c to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Speaker Phone.
a
Press Speaker Phone.
b
Press d or c
This setting will stay until you change it
again.
c
Press Speaker Phone.
Note
• You can adjust the speaker volume while
you are listening to your outgoing
message (OGM) and incoming messages
(ICM's) by pressing
• If you turn Incoming Recording Monitor to
OFF the Speaker for screening calls will
be disabled and you won't hear callers
leaving messages. The volume for other
operations can still be controlled using
d or c .
General setup
3
.
d or c .
25
3