Setting The Speaker Volume - Brother MFC MFC-3340CN Manual

Setting the Speaker Volume

You can adjust the speaker volume.
1
Menu/Set
Press
2
Press or
▲
Low , Med , High or Off .
Menu/Set
Press
3
Stop/Exit
Press
—OR—
Hook
Press
or
key press changes the volume to the next setting. The new
setting will remain until you change it again.
FAX-1940CN only
Fax
When (
volume in the following ways:
Speaker Phone
Press
pressing
choosing. Each key press changes the volume to the next
setting. The new setting will remain until you change it again.
—OR—
You can adjust the speaker volume while you are listening to
your OGM (Outgoing Message) and ICMs (Incoming Messages)
by pressing
If you turn Incoming Recording Monitor to OFF (
7 3
, ) the Speaker for screening calls will be disabled and you
won't hear callers leaving messages. The volume for other
operations can still be controlled using
1 4 3
, , , .
to select
▼
.
.
, and then adjust the speaker volume by pressing
. The LCD shows the setting you are choosing. Each
) is illuminated you can also change the speaker
, and then adjust the speaker volume by
or . The LCD shows the setting you are
or .
3.Speaker
Menu/Set
or .
GETTING STARTED 2 - 6
2
, ,