Choosing The Handset Volume (For Volume Amplify) (Fax-1840C And Fax-1940Cn Only) - Brother MFC MFC-3340CN Manual

Choosing the Handset Volume
(For Volume Amplify)
(FAX-1840C and FAX-1940CN only)
Before you begin to use the machine, you must decide if you need to
set the handset volume to Volume Amplify:On for a user who is
hearing-impaired. The AMPLIFY volume level complies with FCC
standards.
Volume Amplify:Off
This default setting is appropriate if none of the users are
hearing-impaired. During a conversation, users can press
on the control panel to adjust the volume to Low or High . When the
handset is replaced, the handset volume will remain until you change
it again.
Volume Amplify:On — Temporary
This setting is appropriate if some of the users are hearing-impaired.
During a conversation, users can press
panel to adjust the volume to Low , High or Volume Amplify .
When the handset is replaced, the handset volume returns to the
default setting of Low .
Volume Amplify:On — Permanent
Choose Volume Amplify:On — Permanent if all of the users are
hearing-impaired. During a conversation, users can press
on the control panel to adjust the volume to Beeper:Low ,
Beeper:High or Volume Amplify . When the handset is replaced,
the handset volume returns to the default setting of Volume
Amplify .
When you press
volume, the LCD shows the setting you are choosing. Each key
press changes the volume to the next setting.
WARNING
It is important that you do NOT choose Permanent unless ALL
the users are hearing-impaired. Otherwise, the default setting of
Volume Amplify may damage the hearing of some users.
or on the control panel to adjust the
or on the control
GETTING STARTED 2 - 8
or
or