Handlebar switches
Left
1
2
3
4
5
1. "TRIP/INFO" switch
2. Pass switch "
"
3. Dimmer switch "
/
"
4. Turn signal switch "
/
"
5. Horn switch "
"
Right
EAU1234N
1. Start/Engine stop switch "
2. Hazard lights switch "
Pass switch "
Press this switch to flash the head-
lights.
Dimmer switch "
Set this switch to "
beam and to "
" for the low beam.
TIP
When the switch is set to low beam,
both headlights for low beam come on.
When the switch is set to high beam,
both headlights for high beam come
on.
Instrument and control functions
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
1
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
2
Horn switch "
/
/
"
/
"
Press this switch to sound the horn.
EAU12381
"
Start/Engine stop switch " /
To crank the engine with the starter,
set this switch to "
the switch toward "
EAU85410
for starting instructions prior to starting
/
"
the engine.
" for the high
Set this switch to "
gine in case of an emergency, such as
when the vehicle overturns or when the
throttle cable is stuck.
Hazard lights switch " /OFF"
The hazard lights (simultaneous flash-
ing of all turn signal lights) are used in
case of an emergency such as to warn
3-12
EAU12461
/
"
". To signal a left-hand
". When
EAU12501
"
EAU68271
/
"
", and then slide
". See page 5-2
" to stop the en-
EAUM1992
3