Vehicle Lights; Replacing The License Plate Light Bulb - Yamaha TRACER 700 2020 Owner's Manual

Periodic maintenance and adjustment
3. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
6

Vehicle lights

2
1
1. Headlight
2. Auxiliary light
Except for the license plate light bulb,
this model's lights are all LED.
If an LED light does not come on,
check the fuses and then have a
Yamaha dealer check the vehicle. If the
license plate light does not come on,
check and replace the bulb. (See page
6-32.)
NOTICE
Do not affix any type of tinted film or
stickers to the headlight lens.
6-32
EAU80380
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the nuts, washers
and collars, and then remove the
license plate light bulb socket (to-
gether with the bulb) by pulling it
2
out.
1
3
1. License plate light unit
2. Collar
3. Nut
4. License plate light bulb socket
ECA16581
2. Remove the burnt-out bulb by
pulling it out.
EAU59890
3
2
1
4
2