Multi-Function Meter Unit - Yamaha TRACER 700 2020 Owner's Manual

Multi-function meter unit

2 3
1
7 6 5
1. Eco indicator "ECO"
2. Speedometer
3. Tachometer
4. Transmission gear display
5. Clock
6. Fuel meter
7. Multi-function display
The multi-function meter
equipped with the following:
 speedometer
 tachometer
 fuel meter
 clock
 eco indicator
 transmission gear display
 multi-function display
EAUM4251
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
The "TRIP/INFO" switch is located on
4
the left side of the handlebar. This
switch allows you to control or change
the settings of the multi-function meter
unit. To use the "TRIP" switch, move
the "TRIP/INFO" switch in direction (a).
To use the "INFO" switch, move the
"TRIP/INFO" switch in direction (b).
unit is
1. "TRIP/INFO" switch
Instrument and control functions
EWA12423
TIP
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
1
settings while riding can distract the
operator and increase the risk of an
accident.
Speedometer
The speedometer shows the vehicle's
traveling speed.
3-6
 To switch between kilometers and
miles, set the multi-funtion display
to the odometer, and then turn the
key to "OFF". Push and hold the
"TRIP" switch and then turn the
key to "ON". Continue pushing the
"TRIP" switch until display units
change.
 The display units will return to fac-
tory settings in case of battery dis-
connection.
WARNING
3
EWA12423