Repairing a Damaged Ribbon
October 2020
18. Install the paper and ribbon. See pages
19. Close the front of the printer.
20. Install the trim tray.
21. Install the exit tray (if present).
1. Move the power switch to the Off ( ) position.
2. Remove the exit tray (if installed).
3. Remove and empty the trim tray.
Tray" on page 2-6.
2-9
See page 2-5.
See page 2-6.
See "Removing the Trim
Troubleshooting
and 2-16.
Door
Exit Tray
5-11