Recovering From A Power Interruption - Kodak 6900 User Manual

Troubleshooting

Recovering from a Power Interruption

5-14
13. Close the front of the printer.
14. Install the trim tray.
15. Install the exit tray (if present).
CAUTION:
If the printer loses power while printing, the printer stops
with the thermal print head is positioned against the platen
roller. The platen roller could become damaged if the
thermal print head is left in this position.
If a power outage occurs:
1. Remove the exit tray (if installed).
2. Were you printing when the power outage occurred?
Yes
a. Power cycle the printer.
b. Follow the procedure for
"Clearing a Paper Jam" on
page 5-4.
c. Send the print job again.
See page 2-5.
See page 2-6.
Power on the printer when
the power is restored.
Door
No
October 2020