Scdpm2012; Device Drivers; Setting The Lt20 S2/Lt40 S2/Lt60 S2; Tuning Backup Performance - Fujitsu ETERNUS LT20 S2 User Manual

Chapter 4 Setting the Backup Software

4.8 SCDPM2012

4.8 SCDPM2012
4.8.1

Device Drivers

A dedicated device driver is required to use the LT20 S2/LT40 S2/LT60 S2.
To install the latest Microsoft certified library driver, search for and download the appropriate device driver by
specifying the product name and OS at the following site.
http://support.ts.fujitsu.com/Download/Index.asp?LNG=COM
4.8.2

Setting the LT20 S2/LT40 S2/LT60 S2

In the system settings for the LT20 S2/LT40 S2/LT60 S2, set "New ID String" for "Change ID String".
After this setting, the LT20 S2/LT40 S2/LT60 S2 needs to be restarted.
4.9

Tuning Backup Performance

The LT20 S2/LT40 S2/LT60 S2 backup performance may improve by changing the block size.
For details on the procedure for changing the block size and any additional notes that are required, contact
the person in charge of the backup software.
The upper limit of the block size must be 128KB.
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User's Guide -Server Connection-
67
Copyright 2021 FUJITSU LIMITED P3AM-5322-12ENZ0