Chapter 4 Setting the Backup Software
4.5 NetVault
4.5
NetVault
This section provides notes about the settings that are performed for NetVault.
4.5.1
Notes on Operation
■
Cleaning tape drives
•
NetVault has a function to automatically clean tape drives. When automatically cleaning tape drives, use
the NetVault's automatic cleaning function.
•
To use the NetVault cleaning function, make settings as follows.
-
For NetVault Backup 9 and earlier
To use the cleaning function for NetVault Backup 9 or earlier, perform the following settings.
Procedure
1
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User's Guide -Server Connection-
Specify the Generic Cleaning items of the drive as follows:
•
When an LTO5 drive is used (model name: LTS2Z125E, LTS2Z135E, LTS2Z225E, LTS2Z235E,
LTS2Z125L, LTS2Z135L, LTS2Z225L, LTS2Z235L)
-
Issue a load command to start cleaning cycle: on (the default setting is "on")
-
Use Generic Cleaning: on (the default setting is "off")
•
When an LTO6, LTO7, or LTO8 drive is used (model name: LTS2Z246E, LTS2Z247E, LTS2Z248E,
LTS2Z256E, LTS2Z257E, LTS2Z258E, LTS2Z246L, LTS2Z247L, LTS2Z248L, LTS2Z256L,
LTS2Z257L, LTS2Z258L)
-
Issue a load command to start cleaning cycle: off (the default setting is "on")
-
Use Generic Cleaning: on (the default setting is "off")
The following shows an example configuration in which "Issue a load command to start cleaning
cycle" is set to "off" and "Use Generic Cleaning" is set to "on".
Copyright 2021 FUJITSU LIMITED
55
P3AM-5322-12ENZ0