Installing A Driver - Fujitsu ETERNUS LT20 S2 User Manual

Chapter 3 Setting the Operating System
3.3 Windows
3.3.4

Installing a Driver

When a server is configured or an LTO drive is replaced, the LTO drive may not be recognized by the backup
software used. In this case, the LTO drive may not be recognized properly by the device manager.
Therefore, reinstall the driver using the following procedure.
Procedure
1
Open [Device Manager] from [Control Panel] and right-click on the tape drive displayed
with the "?" icon.
2
Select [Update Driver Software].
3
Select [Browse my computer for driver software].
4
Select [Let me pick from a list of device drivers on my computer].
5
Select [Tape drives] from [Common hardware types].
6
Select the following driver to install it.
Manufacturer: LTO
Model: LTO Tape drive
7
Click the [Next] button and then click the [Yes] button for [Update Driver Warning].
8
Close the driver installation completion window.
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User's Guide -Server Connection-
46
Copyright 2021 FUJITSU LIMITED
End of procedure
P3AM-5322-12ENZ0