Husqvarna Automower 405X Operator's Manual page 29
Robotic lawn mower
Hide thumbs
Also See for Automower 405X:
- Operator's manual (96 pages) ,
- Workshop manual (56 pages) ,
- Quick manual (8 pages)
Table of Contents
Advertisement
3.
Use the left arrow button to select the level of the
Spiral Cutting.
4.
Push the BACK button.
3.10.9.2 General
General you can change the general settings of the
In
product.
To set the time & date
1.
Do steps 1–3 in
To get access to the menu on
page 22 .
2.
Use the arrow buttons and the OK button to move
through the menu structure
Time & Date .
3.
Use the number buttons to set the time and then
push the BACK button.
4.
Use the number buttons to set the date and then
push the BACK button.
5.
Use the arrow buttons to set the time format and
then push the BACK button.
6.
Use the arrow buttons to set the date format and
then push the BACK button.
To set the language
To get access to the menu on
1.
Do steps 1–3 in
page 22 .
2.
Use the arrow buttons and the OK button to move
through the menu structure
Language.
3.
Use the arrow buttons to select language and then
push the BACK button.
To set the Country & Timezone
To get access to the menu on
1.
Do steps 1–3 in
page 22 .
2.
Use the arrow buttons and the OK button to move
through the menu structure
Country & Timezone.
3.
Use the arrow buttons to select country and then
push the BACK button.
To set the unit format
To get access to the menu on
1.
Do steps 1–3 in
page 22 .
2.
Use the arrow buttons and the OK button to move
through the menu structure
Unit format.
3.
Use the arrow buttons to select unit format and
then push the BACK button.
To reset all user settings
1.
Do steps 1–3 in
To get access to the menu on
page 22 .
2.
Use the arrow buttons and the OK button to move
through the menu structure
Reset all user settings .
1650 - 003 - 24.02.2021
3.
4.
Note:
Messages, Date & Time, Language and Country
settings are not reset.
Frost Guard
The grass is extra sensitive to wear if the yard is
covered with frost. If the
product is not allowed to start to cut the grass if the
Settings > General >
temperature is below 5° C / 41° F.
Note:
and there can be a delay compared to the ambient
temperature.
To set the Frost Guard
1.
2.
3.
4.
Settings > General >
The About menu
The
for example serial number and firmware versions.
3.10.10 Accessories
Settings > General >
Settings for accessories mounted on the product can be
made in this menu.
3.10.10.1 Information
This menu handles accessories mounted on the
product. Contact your local Husqvarna representative for
more information on available accessories.
Settings > General >
3.10.10.2 Automower
The app gives two modes of connectivity: Long-range
cellular connectivity and Short-range Bluetooth
connectivity.
The product can connect to mobile devices that have the
Automower
Connect is a free app for your mobile device. The
Automower
your Husqvarna product. You can:
Settings > General >
•
•
Use the right arrow button to select
reset of all user settings?
Push the OK button to reset all the user settings.
Security level, PIN code, Loop signal,
Frost Guard is activated, the
The frost guard is located inside the chassis
Do steps 1–3 in
To get access to the menu on
page 22 .
Use the arrow buttons and the OK button to move
Settings > Installation
through the menu structure
> Frost Guard .
Push the OK button to select
Push the BACK button.
About menu displays information about the product,
®
Connect app
®
Connect app installed. Automower
®
Connect app gives extended functions to
See the status of your product.
Change settings to your product.
Proceed with
Frost Guard .
®
®
Installation - 29
Advertisement
Table of Contents
