Yaesu FT-70DR Instruction Manual page 31

Troubleshooting
The FT-70DR/DE cannot receive or transmit data to the computer. The Data
transfer does not start.
• Verify that the programming cable is correctly connected to the FT-70DR/DE data port and to the Com-
puter.
Connect correctly.
• The battery of the FT-70DR/DE may be depleted.
Charge the battery or replace the battery with the new one.
• Is the computer COM Port setting correct?
Set the COM Port correctly.
• Are you operating in a different order from the clicked the "Get Data from FT-70D" in the "Communica-
tions" menu and displayed procedure?
• Follow the on-screen instructions.
• Are you operating in a different order from the clicked the "Send Data to FT-70D" in the "Communica-
tions" menu and displayed procedure?
Follow the on-screen instructions.
The data transmission has stopped before completion
• Disconnecting the connection cable or poor contact of the connection cable.
Confirm the cable connection and try again.
• The battery of the FT-70DR/DE may be depleted.
Charge the battery or replace the battery with the new one.
The data import/export is not successful
• Adjust the number of the rows of CSV file.
• Use the designated letter for the character string.
• When importing and exporting channels such as memory channels and VFO channels, make sure that
the template files are consistent. If the template files are different, an error will occur and the data im-
port and export will not be successful.
ADMS - 10 Instruction Manual
30