Vfo; About The Setting Items Of Vfo Frequencies; Receive Frequency; Transmit Frequency - Yaesu FT-70DR Instruction Manual

VFO

Edit the VFO configurations for each band on this page template.

About the setting items of VFO frequencies

• Receive Frequency

Enter the VFO frequencies for each band. The FT-70DR default Frequencies are pre-entered into the
ADMS-10 standard template.
A frequency that is out of the transceiver's range cannot be entered. When the error pop-up window is
opened, enter the correct frequency.

• Transmit Frequency

The transmit frequency display is grayed out, and it will be set automatically, in accordance with the re-
ceive, and the offset frequencies.

• Offset Frequency

When a transmit frequency is not entered, transmission will be performed at a frequency obtained by
adding/subtracting the offset frequency to/from the receive frequency.

• Offset Direction

Set the frequency shift direction.
OFF: The transmit frequency is not shifted.
-RPT: The transmit frequency is shifted to the minus offset.
+RPT: The transmit frequency is shifted to the plus offset.
ADMS - 10 Instruction Manual
24