Tool Bar; Status Bar; Window - Yaesu FT-70DR Instruction Manual

• Tool Bar

Click the left mouse button on the "Toolbar" parameter in the "Setting" menu to display or hide the Toolbar.
A check mark appears next to the "Toolbar" parameter when the Toolbar is displayed.

• Status Bar

The "Status Bar" describes the action to be executed by the selected menu item, or the depressed toolbar
button, and keyboard latch state.
A check mark appears next to the "Status Bar" parameter when the Status Bar is displayed.

Window

This menu sets the operating window parameters of the ADMS-8 programmer.
• Click the left mouse button on the "Tile (up and down)" parameter in the "Window" menu to display
multiple template files by dividing the window into two lists (upper and lower parts).
• Click the left mouse button on the "Tile (up and down)" parameter in the "Window" menu to display
multiple template files by dividing the window into two lists (right and left parts).
• Click the left mouse button on the "Cascade" parameter in the "Window" menu to display multiple
templates in cascade format.
ADMS - 10 Instruction Manual
19