Yaesu FT-70DR Instruction Manual page 8

2. Press and hold the Power switch to turn the transceiver ON.
3. Remove the plug of the SAD-18B/SAD-11 with the trans-
ceiver ON.
4. Use the supplied USB cable to connect the FT-70DR/DE
DATA terminal to the USB connector of a computer.
• Insert the USB cable into the DATA terminal until you hear
a clicking sound.
5. Press and hold in the [AMS] key while insert the DC connec-
tor of AC adapter to the FT-70/DR/DE EXT DC IN terminal.
• "ADMS" appear on the display.
• Connecting to a computer is finished.
ADMS - 10 Instruction Manual
7
To the USB connector
of a computer