4G Lte Data Modem - Juniper Mesa 3 Owner's Manual

4G LTE Data Modem

The 4G LTE data modem is an option for the Mesa 3, adding
Wireless Wide Area Network data modem capability.
This modem supports all major service providers in North
America, Europe, and many other regions of the world.
Set up a Data Account with a Wireless Provider
Contact a wireless provider to set up data service for the
cellular data modem and obtain an account and micro SIM
card. You need to provide the following information when
setting up an account:
1. Billing Information and business ID, such as your Federal
Tax ID or VAT number.
2. The wireless services required. Specify that you need
data service only. You do not need voice or messaging
services.
3. You may be asked for the modem's IMEI number. From
the Start menu, select Settings > Network & Internet >
Cellular. Tap on the Cellular icon, then select Advanced
Options. The IMEI number is listed under Properties.
Install the SIM Card
The card slot and flexible card holder are designed to
hold the card securely in place so it will not come out or
disconnect if the tablet is dropped. To insert or remove a
card, follow these steps:
1. You must power off the tablet.
2. Remove the battery door as outlined in Chapter 1.
!
CAUTION: The Mesa 3 is not sealed against water and
dust when the battery door is not installed properly.
3. Remove the battery pack by pulling up on the black tab
on the front of the battery pack.
26
Mesa 3 Rugged Tablet Owner's Manual