Audio Features - Juniper Mesa 3 Owner's Manual

CAUTION: Always power off the tablet before removing
!
the battery. Failure to do so may cause loss of data or
damage to the tablet. EXCEPTION: If your tablet has an
internal battery, this caution does not apply. You can
safely remove the removable battery while the unit is
running.
3. Remove the battery pack by pulling up on the black tab
on the battery pack.
4. An image on the battery compartment label shows the
correct location and orientation for the SD card (slot on
the right). Pull the flexible card holder back out of the
way. Push the card into the slot to insert it.
5. Push the flexible card holder back into place, covering
the card slots.
6. Replace the battery pack, and attach the battery door.
To remove the SD card, pull it out. Use tape or an eraser if
you have trouble.

Audio Features

The Mesa 3 has the following audio features:
Speaker - The speaker provides audible indicators
„
and program feedback. You can listen to mono audio
files and watch video. For stereo audio, use Bluetooth,
headphones or HDMI output from the optional dock.
Microphone - Use the microphones to record audio notes
„
or include sound in a video, using the camera (option).
Built in microphones can also be used for Skype calls.
Audio Jack - The audio jack supports a stereo headset
„
or headset/microphone combination with 3.5 mm
connections.
12
Mesa 3 Rugged Tablet Owner's Manual
Flexible
Card Holder
SD Card
Slot