Transfer/Separation Section; Detaching And Refitting The Transfer Roller Assembly - Kyocera ECOSYS P4035dn Service Manual

1-5-6 Transfer/separation section

(1) Detaching and refitting the transfer roller assembly

Procedure
1. Release five hooks by sliding to left the
paper chute guide.
2. Remove the paper chute guide upward.
3. Remove the axes of transfer roller from
each bushings.
4. Remove the transfer roller assembly
upward.
5. Check or replace the transfer roller
assembly and refit all the removed
parts.
Paper chute guide
Hooks
Transfer roller assembly
Axis
Bushing
Transfer roller
1-5-21
Figure 1-5-37
Axis
Bushing
Transfer roller
Figure 1-5-38
2P7/2R0/3PN