Table of Contents
Advertisement
Chapter 3
restarted, press
computer's hardware configuration
2. Press
S
key to specify additional devices when the
Setup
window appears.
3. In the follow-on window of device type, please select
Enter
to continue.
4. Insert the floppy disk of driver, then press
5. The system will ask whether to install driver under
Windows
2000, please select to install driver under
6. The follow-on interface will list the devices to be installed, in which
HPT370 UDMA/ATA100 RAID Controller
users want to install other devices, please operate at this time. If all devices
have been successfully installed, please go to next.)
7. Press
Enter
to continue Windows 2000 setup.
Verify Installation
When the driver has been successfully installed and the computer restarted:
1. Right-click
select
Property
popup menu.
2. In the popup window, select
Hardware
Device Manager
If there is
HPT370 UDMA/ATA100 RAID Controller
Device Manager
window, it indicates that the driver has been successfully
installed. Otherwise, please reinstall the driver.
F6
key when the message
appears.
My Computer
icon,
item in the
item and then click
button.
3-7
RAID Setting Guide
Setup is inspecting your
Windows 2000
Other
and press
Enter
to continue.
WinNT
or under
Windows 2000.
item should be included.( If
item in the popup
Advertisement
Table of Contents
