Table of Contents
  • English

  • Spanish

  • German

    • Deutsch
    • Merkmals des M7VIS
    • Verpackungsinhalt
    • Layout des M7VIS
    • Installation der CPU
    • SDR DIMM Modules: SDR1-2
    • Jumper, Header, Anschlüsse & Slots

Advertisement

Available languages

Available languages

Quick Links

M
7
V
I
S
M
7
V
I
S
M
7
V
I
S
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a
particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Further the vendor reserves the
right to revise this publication and to make changes to the contents here of
without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without
first obtaining the vendor's approval in writing.
The content of this user's is subject to be changed without notice and we
will not be responsible for any mistakes found in this user's manual. All the
brand and product names are trademarks of their respective companies.
i

Advertisement

Table of Contents
loading

Summary of Contents for Biostar M7VIS

  • Page 1 FCC Statement and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 2: Table Of Contents

    CPU Installation ......................3 SDR DIMM Modules: SDR1-2 ..................4 Jumpers, Headers, Connectors & Slots ................ 5 ESPAÑOL....................12 Características del M7VIS .................... 12 Contenido del Paquete....................12 Disposición del M7VIS ....................13 Instalación del CPU ...................... 14 Módulos SDR DIMM: SDR1-2 ..................15 Conectores, Cabezales, Puentes y Ranuras ...............
  • Page 3: English

    English M7VIS Features Use North Bridge: VIA VT8375 (KM266), South Bridge: VT8235 Chipset, Winbond I/O- W83697HF, LAN Phy (optional). Contains on board I/O facilities, which include one serial port, one VGA port, a parallel port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB ports and a LAN port (optional).
  • Page 4: Layout Of M7Vis

    Layout of M7VIS JKBMS1 JATXPWER1 JKBV1 JCFAN1 JUSBV2 JUSB4 JCOM1 JPRNT1 IDE1 IDE2 JGAME1 VT8375 JUSBV1 JVGA1 (KM 266) JUSBLAN1 Winbond BAT1 JAUDIO BIOS JUSB3 PCI1 VT 8235 PCI2 JUSBV3 JPANEL1 JSFAN1 Codec JCODECSEL FDD1 JWOL1 JCMOS1...
  • Page 5: Cpu Installation

    CPU Installation Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU.
  • Page 6: Sdr Dimm Modules: Sdr1-2

    SDR DIMM Modules: SDR1-2 DRAM Access Time: 3.3V Unbuffered SDR PC100/ PC133 Type required. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (168 pin) DIMM Socket SDR Module Total Memory Location Size (MB) SDR 1 64MB/128MB/256MB/512MB/1GB Max is SDR 2 64MB/128MB/256MB/512MB/1GB * The list shown above for DRAM configuration is only for reference.
  • Page 7: Jumpers, Headers, Connectors & Slots

    Jumpers, Headers, Connectors & Slots Hard Disk Connectors: IDE1/ IDE2 The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA / 33/ 66/ 100/ 133 functionality. It has two HDD connectors IDE1 (primary) and IDE2 (secondary).
  • Page 8 Power Connectors: JATXPWR1 JATXPWR1 (ATX Power Conn.) Wake On LAN Header: JWOL1 Ground 5V_SB Wake up JWOL1 Clear CMOS Jumper: JCMOS1 JCMOS1 Assignment Normal Operation Pin 1-2 on (default) Clear CMOS Data Pin 2-3 on...
  • Page 9 Front USB Header: JUSB3 Pin Assignment Pin Assignment Data (-) Data (-) Data (+) Data (+) JUSB3 Ground Ground 5V/ 5VSB Selection for USB: JUSBV1/2/3 JUSBV1/2/3 Assignment Pin 1-2 on 5V_SB Pin 2-3 on CPU Frequency Selection: JCLK1 On ==> 100 MHz Off ==>...
  • Page 10 5V/ 5VSB Selection for Keyboard: JKBV1 JKBV1 Assignment Pin 1-2 on 5V_SB Pin 2-3 on AMR Codec Primary/ Secondary Selection: JCODECSEL Assignment JCODECSEL Pin 1-2 On-board Primary Codec (Default). Pin 2-3 AMR Primary Codec. Case Open Connector: JCI1 Ground Case Open Signal JCI1...
  • Page 11 Front Panel Connector: JPANEL1 PWR_LED ON/OFF HLED ==> Speaker Conn. HLED ==> Hard Driver LED ==> Reset Button ==> Infrared Conn. ==> Sleep Button PWR_LED ==> Power LED ON/ OFF ==> Power-on Button Digital Audio Connector: SPDIF_OUT JSPDIF1 (Optional) JSPDIF1 Audio Subsystem: JF_AUDIO/ JCDIN1 JAUDIO1 JCDIN1...
  • Page 12 JF_AUDIO Assignment Assignment Mic In Ground Mic Power Audio Power RT Line Out RT Line Out Reserved LFT Line Out LFT Line Out Front Panel Audio Connector/ Jumper Block Jumper Setting Configuration Pin 5 and 6 Audio line out signals are routed Pin 9 and 10 to the back panel audio line out connector.
  • Page 13 Game Header: JGAME1 JGAME1 Pin Assignment Pin Assignment Ground MIDI-OUTR Ground MIDI-INR Back Panel Connectors JUSBLAN1 JKBMS1 JPRNT1 PS/2 Mouse Line In Parallel JUSB4 Speaker Mic In PS/2 COM1 VGA1 Keyboard JCOM1 JVGA1 JAUDIO...
  • Page 14: Español

    Español Características del M7VIS Usa Chipset North Bridge: VIA VT8375 (KM266), South Bridge: VT8235, Winbond I/O- W83697HF, LAN Phy (opcional). Contiene facilidades I/O integrados en la placa madre en el que incluye un puerto en serie, un puerto paralelo, un puerto VGA, un puerto de ratón PS/2, un puerto de teclado PS/2, puertos de audio, puertos USB y un puerto LAN (opcional).
  • Page 15: Disposición Del M7Vis

    Cable SPDIF Out X1 (Opcional). Disposición del M7VIS JKBMS1 JATXPWER1 JKBV1 JCFAN1 JUSBV2 JUSB4 JCOM1 JPRNT1 IDE1 IDE2 JGAME1 VT8375 JUSBV1 JVGA1 (KM 266) JUSBLAN1 Winbond BAT1 JAUDIO BIOS JUSB3 PCI1 VT 8235 PCI2 JUSBV3 JPANEL1 JSFAN1 Codec JCODECSEL FDD1...
  • Page 16: Instalación Del Cpu

    Instalación del CPU Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego inserte la CPU.
  • Page 17: Módulos Sdr Dimm: Sdr1-2

    Módulos SDR DIMM: SDR1-2 DRAM Tiempo de Acceso: 3.3V Unbuffered SDR PC100/ PC133 Tipo requerido. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulo DIMM (168 pin) Localización Total del del Módulo Tamaño de Módulo DDR DIMM Memoria (MB) SDR 1 64MB/128MB/256MB/512MB/1GB Máximo de SDR 2...
  • Page 18: Conectores, Cabezales, Puentes Y Ranuras

    Conectores, Cabezales, Puentes y Ranuras Conectores del Disco Duro: IDE1/ IDE2 La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO 0~4, Bus Master, y funcionalidad Ultra DMA 33/ 66/ 100/ 133. Tiene dos conectores HDD IDE1 (primario) y IDE2 (secundario). El conector IDE puede conectar a un master y un drive esclavo, así...
  • Page 19 Conectores de Corriente: JATXPWR1 JATXPWR1 (Conector de Corriente ATX) Cabezal Wake On LAN: JWOL1 Tierra 5V_SB Wake up JWOL1 Puente de Borrar CMOS: JCMOS1 Asignacion JCMOS1 Operacion Normal Contacto (Default) 1-2 on Borrar Datos Contacto CMOS 2-3 on...
  • Page 20 Cabezal Frontal USB: JUSB3 JUSB3 Contactos Asignacion Contactos Asignacion Data (-) Data (-) Data (+) Data (+) Tierra Tierra 5V/ 5VSB Selección para USB: JUSBV1/2/3 JUSBV1/ 2/ 3 Asignacion Contactos 1-2 on 5V_SB Contactos 2-3 on Selección de Frecuencia del CPU: JCLK1 On ==>...
  • Page 21 5V/ 5VSB Selección para Teclado: JKBV1 JKBV1 Asignacion Contactos 1-2 on 5V_SB Contactos 2-3 on AMR Codec de Selección Primario/ Secundario: JCODECSEL Asignacion JCODECSEL Contacto Codec Primario integrado en la placa madre. Contacto AMR Codec Primario. Conector Case Open: JCI1 Tierra Senal Case Open...
  • Page 22 Conector del Panel Frontal: JPANEL1 PWR_LED ON/OFF (+) (-) HLED ==> Conector de Altavoz HLED ==> LED del Disco Duro ==> Boton de Reinicio ==> Conector Infrarojo ==> Boton de Suspension PWR_LED ==> Corriente LED ON/ OFF ==> Boton de Encendido SPDIF_OUT Conector Digital de Audio: JSPDIF1 (Optional)
  • Page 23 JF_AUDIO Contactos Asignacion Contactos Asignacion Tierra Entrada del MIC Corriente del MIC Corriente de Audio RT Salida de Linea RT Salida de Linea Reservado LFT Salida de Linea LFT Salida de Linea Conector del Panel Frontal de Audio/ Jumper Block Jumper Setting Configuracion La senal de salida de linea del Audio...
  • Page 24 Cabezal de Juego: JGAME1 JGAME1 Contactos Asignacion Contactos Asignacion MIDI-OUTR MIDI-INR Conectores del Panel Trasero JGAME1_USB1 RJ45USB1 Puerto de Juego/ JKBMS1 Puertos USB (opcional) JPRNT1 LAN(Opcional) Raton PS/2 Paralelo Teclado Salida del Entrada Entrada de COM1 COM1 VGA1 Altavoz de Linea PS/2 JCOM1 JVGA1...
  • Page 25: Deutsch

    Deutsch Merkmals des M7VIS Die Northbridge: VIA VT8375 (KM266). Die Southbridge: VT8235 Chipsatz, Winbond I/O- W83697HF, LAN Phy (optional). Onboard I/O Geräte: Onboard I/O Geräte: eine serielle Schnittstelle, eine parallele Schnittstelle, eine VGA-Schnittstelle, eine PS/2-Mausschnittstelle, eine PS/2-Tastaturschnittstelle, Audio-Schnittstellen, USB-Schnittstellen, und eine LAN-Schnittstelle (optional).
  • Page 26: Layout Des M7Vis

    Layout des M7VIS JKBMS1 JATXPWER1 JKBV1 JCFAN1 JUSBV2 JUSB4 JCOM1 JPRNT1 IDE1 IDE2 JGAME1 VT8375 JUSBV1 JVGA1 (KM 266) JUSBLAN1 Winbond BAT1 JAUDIO BIOS JUSB3 PCI1 VT 8235 PCI2 JUSBV3 JPANEL1 JSFAN1 Codec JCODECSEL FDD1 JWOL1 JCMOS1...
  • Page 27: Installation Der Cpu

    Installation der CPU Ziehen Sie den Hebel seitwärts von der Sockel und neigen Sie ihn um 90-Grad nach oben. Suchen Sie Pin A im Sockel und den weißen Punkt oder die Abschnittkante in der CPU. Passen Sie Pin A mit dem weißen Punkt/der Abschnittkante zusammen und legen Sie danach die CPU ein.
  • Page 28: Sdr Dimm Modules: Sdr1-2

    SDR DIMM Modules: SDR1-2 DRAM Zugriffszeit: 3.3V unbuffer SDR PC100/ PC133 Typen erfordert. DRAM Typen: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM-Module (168 pin) DIMM-Sockel SDR-Module Speichergröße (MB) Standort SDR 1 64MB/128MB/256MB/512MB/1GB maximal is SDR 2 64MB/128MB/256MB/512MB/1GB *Die obergezeigt Liste für DRAM-Konfiguration ist nur als Referenz. Installation von DIMM-Modulen gibt eine...
  • Page 29: Jumper, Header, Anschlüsse & Slots

    Jumper, Header, Anschlüsse & Slots Festplattenanschlüsse: IDE1/ IDE2 Das Mainboard hat einen 32-Bit Enhanced PCI IDE-Controller, der die Modi PIO0~4, Bus Master sowie die Ultra DMA/33/66/100/133- Funktion zur Verfügung stellt. Dieser ist mit zweii HDD-Anschlüssen versehen IDE1 (primär) und IDE2 (sekundär). Die IDE-Anschlüsse können eine Master- und eine Slave-Festplatte verbinden, so dass bis zu 4 Festplatten angeschlossen werden können.
  • Page 30 Power Connectors: JATXPWR1 JATXPWR1 (ATX Netzstromanschl.) Wake On LAN Header: JWOL1 5V_SB Wake up JWOL1 Jumper zum Löschen des CMOS: JCMOS1 Beschreibung JCMOS1 Normae Pin 1-2 Operation geschlossen (Default) Pin 2-3 CMOS Daten geschlossen loschen...
  • Page 31 Front USB Header: JUSB3 Pin Beschreibung Pin Beschreibung Data (-) Data (-) Data (+) Data (+) GNDd JUSB3 5V/ 5VSB Auswahl für USB: JUSBV1/2/3 JUSBV1/2/3 Beschreibung Pin 1-2 geschlossen Pin 2-3 5V_SB geschlossen CPU Frequenz Auswahl: JCLK1 On ==> 100 MHz Off ==>...
  • Page 32 5V/ 5VSB Auswahl für Tastatur: JKBV1 JKBV1 Beschreibung Pin 1-2 geschlossen 5V_SB Pin 2-3 geschlossen Auswahl für Primär/ Sekundär AMR Codec: JCODECSEL Beschreibung JCODECSEL Pin1-2 Primar Onboard geschlossen Codec(Default) Primar AMRCodec Pin 2-3 geschlossen Anschluss für Gehäuse-Öffnen: JCI1 Case Open Siganl JCI1...
  • Page 33 Anschlüsse auf der Vorderseite: JPANEL1 PWR_LED ON/OFF (+) (-) HLED ==> Lautsprecheranschl. HLED ==> Festplattenanzeige ==> Reset-Taste ==> Infrarotanschl. ==> Sleep-Taste PWR_LED ==> Stromanzeige EIN/AUS ==> EIN /Ausschalttaste Digital-Audio-Anschluss: JSPDIF1 (optional) SPDIF_OUT JSPDIF1 Audio Subsystem: JF_AUDIO/ JCDIN1 JAUDIO1 JCDIN1 JF_AUDIO JCDIN1 (Front Audio Header) (CD-ROM Audio-In Header)
  • Page 34 JF_AUDIO Beschreibung Beschreibung Mic In Mic Power Audio Power RT Line Out RT Line Out Reserved LFT Line Out LFT Line Out Jumper-Block Audio-Anschl sse f r die Vorderseite/ Jumper-Einstellen Konfiguration Audio-Ausgang-Singals werden zu der Audio- Pin 5 und 6 Ausgang-Anschluss an der R ckwand geleitet .
  • Page 35 Game Header: JGAME1 JGAME1 Pin Beschreibung Pin Beschreibung MIDI-OUTR MIDI-INR Anschlüsse auf der Rückseite JUSBLAN1 JKBMS1 JPRNT1 PS/2- Maus Parallel Line-In JUSB4 Lautsprecher- Ausgang Mic-In PS/2- COM1 VGA1 Tastatur JCOM1 JVGA1 JAUDIO...
  • Page 36: Warpspeeder

    WarpSpeeder Introduction [ WarpSpeeder™ ], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage.
  • Page 37: System Requirement

    System Requirement OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP, you do not need to install DirectX 8.1.) Installation Execute the setup execution file, and then the following dialog will pop up.
  • Page 38: Usage

    When you see the following dialog in setup procedure, it means setup is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox is checked, the Tray Icon utility and [WarpSpeeder™] utility will be automatically and immediately launched after you click “Finish”...
  • Page 39 Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar. This utility is responsible for conveniently invoking [WarpSpeeder™] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder™] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following figure.
  • Page 40 b. Contains About, Voltage, Overclock, and Hardware Monitor Buttons for invoking respective panels. With a user-friendly Status Animation, it can represent 3 overclock percentage stages: Duck walking => overclock percentage from 100% ~ 110 % Duck running => overclock percentage from 110% ~ 120% Duck burning =>...
  • Page 41 3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not.
  • Page 42 4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. Overclock Panel contains these features: a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”: provide user the ability to do real-time overclock adjustment.
  • Page 43 b. “Recovery Dialog button”: Pop up the following dialog. Let user select a restoring way if system need to do a fail-safe reboot. “Auto-overclock button”: User can click this button and [ WarpSpeeder™ ] will set the best and stable performance and frequency automatically. [ WarpSpeeder™...
  • Page 44 5. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. In this panel, you can get the real-time status information of your system. The information will be refreshed every 1 second.
  • Page 46 Note: Because the overclock, overvoltage, and hardware monitor features controlled several separate chipset, [ WarpSpeeder™ ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels’ functions. This property can make [ WarpSpeeder™...
  • Page 47: Trouble Shooting

    Trouble Shooting PROBABLE SOLUTION No power to the system at all Power light don’t * Make sure power cable is securely plugged in illuminate, fan inside power supply does not turn * Replace cable on. Indicator light on keyboard does not turn on * Contact technical support PROBABLE SOLUTION...
  • Page 48: Solución De Problemas

    Solución de Problemas CAUSA PROBABLE SOLUCIÓN No hay corriente en el sistema. La luz de * Asegúrese que el cable de transmisión esté corriente no ilumina, ventilador dentro de la seguramente enchufado. fuente de alimentación apagada. Indicador de * Reemplace el cable. luz del teclado apagado.
  • Page 49: Problemlösung

    Problemlösung MÖGLICHE URSACHE LÖSUNG Das System hat keine Spannungsversorgung. * Versichern Sie sich, dass das Stromkabel richtig Die Stromanzeige leuchtet nicht, der Lüfter im angebracht ist Inneren Stromversorgung wird nicht * Ersetzen Sie das Stromkabel eingeschaltet. Tastaturleuchten sind nicht an. * Wenden Sie sich an Ihre Kundendienststelle MÖGLICHE URSACHE LÖSUNG...
  • Page 50 03/17/2003...

Table of Contents