Chapter 3
3.4.5 Add Spare Disk
The following steps shall be taken to add the spare disk.
1. In the menu zone, select
confirm.
2. In menu zone of the popup sub-interface, select
Array: None
3. In the validated channel status zone, select the mirror array and
press
Enter
4. In the menu zone of the popup sub-interface , select
Drive: None
5. In the validated channel status zone, select the spare disk to be
added and press
3.4.6 Remove Spare Disk
The following steps shall be taken to remove the spare disk.
1. In the menu zone, select
confirm.
2. The
1. Select Mirror Array: None
the popup sub-interface.
3. In the validated channel status zone, select the spare disk to be
removed and press
3.4.7 Set Disk Mode
The followng steps shall be taken to set the disk mode.
1. Select
6. Set Disk Mode
confirm.
2. Select the disk mode to be set in the popup selection box and press
Enter
to confirm.
4. Add Spare Disk
and press
Enter
to confirm.
to confirm.
and press
Enter
to confirm.
Enter
to confirm.
5. Remove Spare Disk
item appears in the menu zone of
Enter
to confirm.
in the menu zone and press
3-35
RAID Setting Guide
and press
Enter
to
1. Select Mirror
2. Select Spare
and press
Enter
to
Enter
to