Biostar M7TDF User Manual page 69

Biostar m7tdf motherboard: user guide
Hide thumbs Also See for M7TDF:
Table of Contents

Advertisement

Chapter 2
PCI / VGA Palette Snoop
Choose Disabled or Enabled.
compatible take the output from a VGA controller and map it to their display as a
way to provide boot information and VGA compatibility.
However, the color information coming from the VGA controller is drawn from the
palette table inside the VGA controller to generate the proper colors, and the
graphic controller needs to know what is in the palette of the VGA controller. To
do this, the non-VGA graphic controller watches for the Write access to the VGA
palette and registers the snoop data.
controller is on the PCI bus and a non-VGA graphic controller is on an ISA bus, the
Write Access to the palette will not show up on the ISA bus if the PCI VGA
controller responds to the Write.
In this case, the PCI VGA controller should not respond to the Write, it should only
snoop the data and permit the access to be forwarded to the ISA bus.
non-VGA ISA graphic controller can then snoop the data on the ISA bus. Unless
you have the above situation, you should disable this option.
Disabled (default)
Enabled
Some graphic controllers which are not VGA
In PCI based systems, where the VGA
Disables the function.
Enables the function.
2-28
BIOS Setup
The

Advertisement

Table of Contents
loading

Table of Contents