Table of Contents
Advertisement
Chapter 1
HPT370 is designed to enable you add high performance ATA/ATAPI
devices. (Optional)
Ultra DMA 100MB/S operation per ATA channel.
Support up to 66MHz PCI bus Clock.
One PCI function supports two independent ATA channels.
Dedicated ATA Bus.
ATA clock independent from PCI bus.
Optional between external 50Hz ATA bus clock or internal PLL.
256Byte FIFO per ATA channel.
Large FIFO independent.
Easy Plug-and-Play feature.
Supports up to 4 IDE devices. (Coexist with on-board IDE)
Supports Hard Drive with capacity larger than 30GB.
RAID function supported (RAID 0,1,0+1).
Supports the most popular Windows 95/98,Windows NT4.0, Windows
2000, Windows ME and Linux.
Supports booting function with Flash Memory interface.
Automatically fine tunes to the best performance for each IDE/ATAPI
device.
Concurrent PIO and bus master access(ATA port accessible during DMA
transfer)
Total ATA bus tri-state by external control and Supports Hotswap (Low
signal Current).
Super I/O Built-in onboard
Support one multi-mode Parallel Port.
(1) Standard & Bidirection Parallel Port (SPP).
(2) Enhanced Parallel Port (EPP).
(3) Extended Capabilities Port (ECP).
Supports two serial ports, 16550 UART with 16 byte FIFO.
UART data rates up to 1.5 Mbaud.
Supports one Infrared transmission (IR) port.
Supports PS/2 Mouse /Keyboard.
Supports 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB floppy disk
drives.
Motherboard Description
1-5
Advertisement
Table of Contents
