Table of Contents
Advertisement
Section 4
Repair and Adjustment Procedures
4.1 Preparing the StreamPunch Pro for Service
Most service requires that the StreamPunch Pro be separated from the printer and
finisher and the rear cover be removed.
Warning: Disconnect the unit from power and maintain the cord in your possession.
Failure to observe this warning can result in injury or electrical shock.
Procedure
•
Unplug the unit from power.
•
Disconnect the communication cable.
•
Empty Chip Bin.
4.1.1 Separating the Punch from the Printer
•
Undock the StreamPunch Pro from the printer by releasing the docking bracket form
inside the front door.
•
Release the finisher from the StreamPunch Pro by releasing the docking bracket
from inside the finisher.
53
Advertisement
Table of Contents
