(16) Adjusting the looper cover
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
The looper cover ❷ should smoothly close without coming in contact with upper knife ❶ when slowly
o
closing looper cover ❷ with upper knife ❶ in its lowest position of its stroke.
❶
Cloth chip cover
(17) Adjusting the cloth chip cover
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
When cloth chip cover ❸ is pressed away from you, it should not rattle.
o
In addition, the cloth chip cover ❸ should not come in contact with upper knife ❶ and lower looper ❹ .
Standard adjustment
❷
Frame
Standard adjustment
❺ (There are two setscrews on the inside.)
– 28 –
❷
❼
❻
❺
❹
❸