Manually Configuring Network Settings
4.
Write in the IP address and subnet mask from the
"IP Address" tab
5.
Click the "Gateway" tab
the chart.
6.
Click the "DNS Configuration" tab
the chart.
7.
If not already selected, select "Obtain IP address automatically" in the
"IP Address" tab. Click "OK".
Restart the computer. When the computer restarts, your network
adapter(s) are now configured for use with the Router.
Set up the computer that is connected to the DSL or cable modem FIRST
using these steps. You can also use these steps to add computers to your
Router after the Router has been set up to connect to the Internet.
(3)
.
(2)
. Write the gateway address down in
(1)
. Write the DNS address(es) in
73
1
2
3
4
5
6
7
8
9
10