Knowing your Router
(8)
6.
Power Jack
Connect the included 5V DC power supply to this jack.
7.
Wired Computers
Connect your wired (non-wireless) computers to these ports. These
ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for
standard UTP category 5 or 6 Ethernet cable. The ports are labeled 1
through 4. These ports correspond to the numbered LEDs on the front
of the Router.
8.
Modem
This port is for connection to your DSL or cable modem. Use the cable
that was provided with the modem to connect the modem to this port.
Use of a cable other than the cable supplied with the cable modem
may not work properly.
(7)
�
�
�
�����
���������������
(9)
(6)
�����
�
������
������������
12