Belkin ME1004-R User Manual page 25

Connecting and Configuring your Router
Step 5 Configure the Router
Your Router is now connected to the Internet. Now you can begin surfing
the Internet by opening your browser and going to your favorite web page.
Congratulations. You have finished installing your new MyEssentials
Router. You are ready to set up the other computers in your home. You
can also add computers to your Router anytime you want.
The Wizard will now transfer all of
the configuration information to the
Router. This will take approximately
one minute. During this time, do not
turn off the Router or computer. The
Router will restart itself at the end of
this step.
5.1
Checking Internet
The Wizard will now check
for an Internet connection.
This can take a few minutes.
The Wizard may not detect a
connection right away. If not,
it will retry a number of times.
The "Connected" light on the
front panel of the Router will
flash during this time. Please be
patient through this process.
5.2
Finished
When the Internet connection
is complete, the Wizard will tell
you that you are finished. The
"Connected" LED on the front of
the Router will be solid GREEN,
indicating that the Router is
now connected to the Internet.
21
1
2
3
4
5
6
7
8
9
10