Belkin ME1004-R User Manual page 72

Using the Web-Based Advanced User Interface
Changing the Login Time-Out Setting
The login time-out option allows you to set the period of time that you can
be logged into the Router's Web-Based Advanced User Interface. The timer
starts when there has been no activity. For example, you have made some
changes in the Web-Based Advanced User Interface, then left your computer
alone without clicking "Logout". Assuming the time-out is set to 10 minutes,
then 10 minutes after you leave, the login session will expire. You will have
to log into the Router again to make any more changes. The login time-out
option is for security purposes and the default is set to 10 minutes.
Note: Only one computer can be logged into the Router's Web-Based
Advanced User Interface at one time.
Setting the Time and Time Zone
The Router keeps time by connecting to a Simple Network Time Protocol
(SNTP) server. This allows the Router to synchronize the system clock
to the global Internet. The synchronized clock in the Router is used to
record the security log and control client filtering. Select the time zone
that you reside in. If you reside in an area that observes daylight saving,
then place a check mark in the box next to "Automatically Adjust Daylight
Saving". The system clock may not update immediately. Allow at least 15
minutes for the Router to contact the time servers on the Internet and get
a response. You cannot set the clock yourself.
68