Belkin ME1004-R User Manual page 46

Using the Web-Based Advanced User Interface
QoS (Quality of Service) Configuration
QoS prioritizes important data on your network such as multimedia
content and Voice over IP (VoIP) so it will not be interfered with by other
data being sent over the network. Based on 802.11e, you can turn this
feature on or off by selecting it from the drop-down menu and choosing
the acknowledgement mode you want to use. If you plan to stream
multimedia content or use VoIP on your network, we recommend that you
enable the QoS feature.
Changing the Wireless Channel
There are a number of operating channels you can choose from. In the
United States, there are 11 channels. In Australia, the United Kingdom,
and most of Europe, there are 13 channels. In a small number of other
countries, there are other channel requirements. Your Router is configured
to operate on the proper channels for the country you reside in. The
default channel is 11 (unless you are in a country that does not allow
channel 11). The channel can be changed if needed. If there are other
wireless networks operating in your area, your network should be set to
operate on a channel that is different than the other wireless networks.
For best performance, use a channel that is at least five channels away
from the other wireless network. For instance, if another network is
operating on channel 11, then set your network to channel 6 or below.
To change the channel, select the channel from the drop-down list. Click
"Apply Changes". The change is immediate.
42