Setting Up Parental Control; Automatic Setup - Belkin F6D3230-4 Software Setup Manual

Parental control web content filter

Hide thumbs Also See for F6D3230-4:

Table of Contents

Setting up Parental Control

The Router must be connected to the Internet before setting up

Parental Control. If you have not set up the Router to connect to the

Internet, follow the steps in your Quick Installation Guide to set up

the Router before attempting to set up Parental Control.

Automatic setup is the easiest way to get Parental Control up

and running.

After setting up the Router to connect to the Internet for the first

time, a setup page will automatically be displayed when you open

your browser. Follow the steps below.

Open a browser on any computer on the network. A page will

be displayed prompting you to sign up for Parental Control

for six months FREE. If this page does not display, follow the

instructions for Manual Setup in the next section of this guide.

Select the option that lets you enable Parental Control. If you

click "No Thanks", you will not be asked to sign up again.

You can manually enable Parental Control at any time later by

following the Manual Setup instructions.

You will be prompted to ceate a password and provide an e-mail

address to which change notifications should be sent. Enter the

e-mail address you wish to use, and enter a password to be used

to manage the Parental Control function. Note: This password

is different than the password used to manage the Router and

should be unique to keep unauthorized users from changing the

Parental Control settings.

Once you have entered this information, the Parental Control

feature is activated. To view or change the settings, follow

the directions in the section called "Managing Parental

Control Settings."

Table of Contents