Setting.mac.address.control - Belkin N1 MIMO Wireless User Manual

Using the Web-Based Advanced User Interface
Setting MAC Address Control
The.MAC.address.filter.is.a.powerful.security.feature.that.allows.you.to.
specify.which.computers.are.allowed.on.the.wireless.network..
Note:.This.list.applies.only.to.wireless.computers..This.list.can.be.
configured.so.any.computer.attempting.to.access.the.wireless.network.that.
is.not.specified.in.the.filter.list.will.be.denied.access..When.you.enable.
this.feature,.you.must.enter.the.MAC.address.of.each.client.(computer).to.
which.you.want.to.allow.network.access..The."Block".feature.lets.you.turn.
on.and.off.access.to.the.network.easily.for.any.computer.without.having.to.
add.and.remove.the.computer's.MAC.address.from.the.list.
Setting up an Allow Access List
1.
Select.the."Allow".radio.button.(1).to.begin.setting.up.a.list.of.
computers.allowed.to.connect.to.the.wireless.network..
2.
. Next,.in.the."MAC.Address".field.that.is.blank.(3),.type.in.the.MAC.
address.of.the.wireless.computer.you.want.to.be.able.to.access.the.
wireless.network,.then.click."<<Add".(4)..
3.
. Continue.to.do.this.until.all.of.the.computers.you.want.to.add.have.
been.entered.
4.
. Click."Apply.Changes".(5).to.finish.
49
(1)
(2)
(3)
(4)
(5)