Table of Contents
Advertisement
Adjusting Projector Features
Follow the instructions in these sections to use your projector's feature adjustments.
Shutting Off the Picture and Sound Temporarily
Stopping Video Action Temporarily
Zooming Into and Out of Images
Projector Security Features
Projecting Two Images Simultaneously
Using Multiple Projectors
Running Light Source Calibration
Saving Settings to Memory and Using Saved Settings
Scheduling Projector Events
Copying Menu Settings Between Projectors
Shutting Off the Picture and Sound Temporarily
You can temporarily turn off the projected picture and sound if you want to redirect your audience's
attention during a presentation. Any sound or video action continues to run, however, so you cannot
resume projection at the point that you stopped it.
Note: If the picture and sound are off for more than 30 minutes, the power automatically turns off. You
can turn the A/V Mute Timer setting on and off in the projector's Operation menu.
1. Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound.
2. To turn the picture and sound back on, press the A/V Mute button again.
Note: You can also stop projection using the A/V Mute button on the projector.
138
Advertisement
Table of Contents
