Creating A Playlist Using Epson Web Control - Epson PowerLite EB-L520W User Manual

Note: To select a specific playlist, select the USB Viewer setting in the Settings menu and use the arrow
buttons to select your playlist.
Parent topic:
Related references
Projector Feature Settings - Settings Menu
Additional Projector Software and Manuals
Related tasks
Using the Home Screen

Creating a Playlist Using Epson Web Control

You can create playlists using a web browser and save them to a USB flash drive connected to a
projector on a network when the projector is in Content Playback mode.
Caution: Do not remove the USB flash drive from the projector or disconnect the projector's power cord
while creating playlists. Data saved on the USB flash drive may be damaged.
1. Make sure the projector is in Content Playback mode.
2. Make sure your computer or device is connected to the same network as the projector.
3. Connect a USB device to the projector's USB-A port.
4. Start your web browser on your computer or device.
5. Enter the projector's IP address into the browser's address box and press the computer's Enter key.
Note: When entering an IPv6 address, wrap the address with [ and ].
Note: If you see a log in window, enter your user name and password. (The default user name is
EPSONWEB and the default password is admin.)
You see the Epson Web Control screen.
6. Select USB Memory Device.
7. Select Upload New Data.
Projecting in Content Playback Mode
134