Adjusting Projector Features; Using The Projector As A Bluetooth Speaker - Epson EH-LS650B User Manual

Adjusting Projector Features

Follow the instructions in these sections to use your projector's feature adjustments.

Using the Projector as a Bluetooth Speaker

Operating Connected Devices Using the HDMI Link Features
Adjusting the Color Convergence (Panel Alignment)
Muting the Sound Temporarily
Shutting Off the Picture Temporarily
Changing the Projected Image Using Flexible Picture
Projector Security Features
Updating the Firmware
Resetting the Projector
Using the Projector as a Bluetooth Speaker
You can use the projector's speakers to output audio from a compatible device connected by Bluetooth.
Note: Bluetooth audio devices are not supported in some countries and regions. You cannot connect
multiple audio/video devices by Bluetooth at the same time. You may not be able to connect depending
on type of device and its Bluetooth standards. Several attempts may be required before pairing is
successful. Even when connecting within the specified communication distance, connections can be lost
due to the signal status.
1. Press the
2. Select Bluetooth Speaker Mode and press the Enter button to enable it.
3. Enable the Bluetooth function on the device you want to connect to and select Projector from the
available device list. See the documentation for the connected device for more information.
Note: You can change the name displayed for the projector. Press the
on the remote control and then select Device Preferences > About > Device name. There is a
delay in the audio output from any Bluetooth audio device. If you want to temporarily turn off the
projected image, press the
connection, disconnect from the connected device.
settings button on the remote control.
blank button on the projector or remote control. To cancel a Bluetooth
60
Android TV settings button