Table of Contents
Advertisement
Caution: Do not place flammable objects in front of the lens. If you schedule the projector to turn on
automatically, flammable objects in front of the lens could catch on fire.
Note: The Schedule Protection setting in the Password Protection menu must be turned off to
schedule an event.
Saving a Scheduled Event
Viewing Scheduled Events
Editing a Scheduled Event
Parent topic:
Adjusting Projector Features
Related tasks
Setting the Date and Time
Selecting Password Security Types
Saving a Scheduled Event
You can select projector commands you want to perform and schedule them as an event.
Note: Light Source Calibration events do not start if the projector is not used continuously for at least 20
minutes, if the projector has been running for more than 24 hours, or if the projector is regularly turned
off by shutting off the power outlet. Set Light Source Calibration events to occur only after 100 hours of
usage.
1. Set the date and time in the Date & Time menu.
2. Press the Menu button.
3. Select the Extended menu and press
Enter.
4. Select the Schedule Settings setting and press
Enter.
5. Select the Schedule menu and press
Enter.
6. Select Add New and press
Enter.
164
Advertisement
Table of Contents
