Epson PowerLite EB-L520W User Manual page 189

Setting
A/V Settings
Standby Mode
Options
A/V Output
Audio Settings
Communication On
Communication Off
Port
189
Description
Selects various audio and video
output settings
A/V Output: select to output
audio and video to an external
monitor when the projector is in
standby mode (disable Quick
Startup to use this setting)
Audio Settings: selects audio
output settings
• Audio Output: select the
audio source to output when
projecting images from the
Computer ports
• HDMI1 Audio Output/HDMI2
Audio Output: select the
audio source to output when
projecting images from the
HDMI1 or HDMI2 ports
Enable this setting to allow the
following operations to occur
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)
• Communication from the
HDBaseT port (Control
Communications must be set
to On)
Port: selects the port to use from
Wired LAN or Wireless LAN
when Standby Mode is set to
Communication On