Setting Up Projector Network E-Mail Alerts - Epson PowerLite EB-L520W User Manual

2. Start Epson iProjection on your mobile device.
3. Use the QR code reader feature to read the QR code and connect your device to the projector. Visit
epson.com/iprojection
(Caribbean) for instructions.
If you do not see the QR code, press the Menu button on the remote control and select the Network >
Network Configuration > Basic > Display LAN Info. menu. Set the Display LAN Info. setting to Text
& QR Code.
Parent topic:
Related references
Projector Network Settings - Network Menu
Additional Projector Software and Manuals

Setting Up Projector Network E-Mail Alerts

You can set up the projector to send you an e-mail alert over the network if there is a problem with the
projector.
Note: If the Standby Mode setting is set to Communication On in the Extended menu, you can receive
e-mail alerts even if the projector is in standby mode (the power is off). The projector must be connected
to a wired LAN or a wireless LAN with the Connection Mode setting set to Advanced.
1. Press the Menu button.
2. Select the Network menu and press Enter.
3. Select Network Configuration and press Enter.
(U.S.), epson.ca/iprojection
Wireless Network Projection
(Canada), or latin.epson.com/iprojection
60