Xerox Phaser 3052 Service Manual page 88

5. Perform the Following (Figure 3):
a. Disconnect CN3 from the paper Feed PWB, and remove the screw (1).
b. Remove the Feed and Registration Clutches, remove the Snap Rings and Washer
from the Clutches.
c. Remove the Feed and Registration Clutch Assembly and the PWB, release the
latches (2).
CN3
Snap Rings
& Washers
Figure 3 Feed and Registration Clutch / Paper Feed PWB
6. Remove the Feed and Registration Clutch Drive Gears
Repairs
REP 1.25
Screw
Latches
(Figure 4).
June 2014
4-36
Figure 4 Feed and Registration Clutch Drive Gears
Xerox® Phaser® 3052/3260 Service Manual
Clutch Drive
Gears