Xerox Phaser 3052 Service Manual page 56

NOTE: A wide blade flat screwdriver can be used to help release the Front Cover Pivot.
5. Release the Front Cover Pivots (2) and remove the cover
Figure 3 Front Cover Removal
6. IMPORTANT
Remove the Tag Matrix from the inside of the manual feed slot.
7. Place the Tag Matrix on the new Front Cover Assembly.
Repairs
REP 1.1
(Figure 3).
Pivots
Figure 4
June 2014
4-4
Figure 4 Tag Matrix on new Front Cover Assembly
Replacement
Install the components in the reverse of removal.
Xerox® Phaser® 3052/3260 Service Manual