Xerox Phaser 3052 Service Manual page 75

Screw
Figure 2 Feed and Reg Sensors PWB Cover (Bottom View)
6. Release the Latch and remove the Feed and Registration Sensor PWB
Sensors PWB
Latch
Figure 3 Feed and Registration Sensors PWB (Bottom View)
Xerox® Phaser® 3052/3260 Service Manual
Latch
(Figure 3).
June 2014
7. Removing the Feed and Registration Sensor Actuators
Note the location of the Spring in the frame cutout for reinstallation
a. Release the Actuator from the latch.
b. Remove the Actuator.
Feed Sensor Actuator
Reg Sensor Actuator
Latch
Figure 4 Feed and Registration Sensors Actuators (Bottom View)
Replacement
NOTE: Tapered Plastic Screws and Round Machine Screws are used to hold the cover to the
frame. Make sure that the Plastic Screws go into plastic components and Machine Screws go
into the metal frame.
Install the components in the reverse of removal.
4-23
(Figure 4):
(Figure 5).
Spring
Spring
Repairs
REP 1.14