Xerox Phaser 3052 Service Manual page 77

Screws
Figure 2 Removing the Feed and Forward Roll Assembly (Bottom View)
7. Remove the Feed and Forward Rolls from the assembly
Figure 3 Removing the Feed and Forward Roll
Xerox® Phaser® 3052/3260 Service Manual
Replacement
Install the components in the reverse of removal.
NOTE: Tapered Plastic Screws and Round Machine Screws are used to hold the cover to the
frame. Make sure that the Plastic Screws go into plastic components and Machine Screws go
into the metal frame.
NOTE: When replacing the Feed and Forward Roll Assembly made sure the Flat on the Bush-
ing is lined up with the Flat on the Assembly
(Figure 3).
June 2014
4-25
(Figure 4).
Bushing Flat
Figure 4 Bushing Flat (Bottom View)
Repairs
REP 1.15