Advertisement
SCION
Procedure
Release with Screwdriver
Fig. 3-6
Fig. 3-7
Fig. 4-1
Fig. 4-2
Issue: A
04/15/04
tC
2005 -
Plastic Hook
Page 4 of 17 pages
VSE SUBWOOFER (BAZOOKA
(i) Using a 10mm socket, remove the passenger
rear D-Ring (Tie Down Hook) (discard) and
save the 10mm bolt for reuse.
(j) Remove and save, the Philips head screw from
the upper rear passenger panel & save for
reuse.
(k) Remove & discard passenger rear taillight
access panel.
(l) Using the 1.5" narrow blade flat head
screwdriver, gently insert into the passenger
plastic cargo net hook & rotate to remove.
(Fig.3-6)
(m) Gently release the lower portion of rear
passenger side trim, then using a NRT, gently
pry off the rear cargo passenger side inner
panel. (Fig.3-7)
4. Disassemble Front Cabin Interior Components
(a) Unscrew OE Shift Knob Counter-Clockwise
until OE Shift Knob is removed.
(b) Use a NRT to remove the shift surround
console. (Fig.4-1)
(1) Disconnect the cigarette lighter wire
harness from underneath the shift surround
console prior to removal.
(c) Using a NRT, pry off the Upper Center
Instrument Panel (IP). (Fig.4-2)
(1) Make sure the radio cover door is closed.
(2) Disconnect the center IP main harness
from the backside of the center IP prior to
removal.
®
)
Advertisement
