Advertisement
SCION
Procedure
Issue: A
04/15/04
tC
2005 -
Page 11 of 17 pages
VSE SUBWOOFER (BAZOOKA
11. Reassemble Front Cabin Interior Components
(a) Referencing Step 4. g - f., reassemble all
panels into their original locations, making
sure that all clips are securely fastened.
(b) Referencing Step 4. e., reassemble glove
compartment & strut to its original location,
making sure that all clips are securely
fastened.
(c) Referencing Step 4. c., carefully reconnect
the vehicle harness back onto the center IP.
(1) Insert the center IP back onto the dash
assembly by carefully inserting the top
alignment tabs of the center IP into the
dash assembly
(2) Once tabs are secured, then apply pressure
to the perimeter of the center IP until it is
flush with the dash assembly.
(d) Referencing Step 4. b., carefully reconnect
the cigarette lighter harness back onto the shift
surround console
(1) Insert the shift surround console back onto
the dash assembly by carefully aligning
the alignment tabs.
(2) Once tabs are secured, then apply pressure
to the perimeter of the shift surround
console until it is flush with the dash
assembly.
(e) Referencing Step 4. a., screw the OE Shift
Knob Clockwise until OE Shift Knob is
securely tightened.
®
)
Advertisement
