Bass Tubes ® patented subwoofer enclosure design available only from SAS. SPECIFICATIONS * The efficiency levels of all Bazooka subwoofer speaker systems are measured in the typical environment: In the low bass region with one watt of power. INSTALLATION Figure 1 ®...
Locate an area in the rear of the vehicle where you would like to place the Bazooka speaker system. The location you have selected must meet the following requirements in order for the Bazooka to be properly...
Page 5
Due to the jarring and shifting that can occur in a vehicle, the mount- ed as illustrated in ing straps may stretch or loosen. We recommend that you check the figure 6. straps regularly to assure that your Bazooka is mounted securely in place. 7. Adjust buckle end of strap so that it 22”...
DO NOT substitute the 7.5 amp fuse included with the Amplified Level Inputs Bazooka with anything other than the same fast blow current rated fuse. Substitution or deletion will void the product's warranty and may cause damage to your car or the amplifier.
Option Three: The Amplified Bazooka has a built -in Auto Turn-On Feature. If you choose to use this feature, the Amplified Bazooka will turn on automatically whenever there is music present at the inputs (high level or low level input). Please take notice of the Quick Disconnect Yellow On/Off Jumper Loop located on the Amplified Bazooka wiring harness.
When one of the Amplified Bazooka's High-level Input channels is out of phase electrically with the other High-level Input channel, your Bazooka will sound as if it has little or no output and any output that is produced may sound distorted. If you suspect that your Bazooka is out of phase, use the AM I IN PHASE procedure to diagnose and cor- rect the Bazookas' output, and proper bass response will be produced.