T
S
ERMINAL
ETUP
x
V
610 Battery Behavior (No Power Cord)
x
V
610 Battery
Behavior (No
Power Cord)
NOTE
Manual Startup
NOTE
Manual Shutdown
NOTE
30
O
5
V
X
5
MNI
XXX AND
When you have finished connecting optional peripheral(s), you are ready to power
x
the V
610 terminal from the attached battery.
If you connect the V
corded power mode and starts up automatically, regardless of the battery charge
state.
Hold the green key down through a series of short beeps until the terminal
displays the startup screen.
VERIFONE OMNI
12/02/2005 VERIX
*DEFAULT CERTIFICATE*
COPYRIGHT 1997-2005
ALL RIGHTS RESERVED
BATTERY 98%
Figure 23
V
When the terminal has power, the terminal lights are activated and the green LED
indicator remains lit.
If an application is loaded in the terminal, it starts after the initial VeriFone
copyright screen and usually displays a unique copyright screen. If no application
is loaded in the terminal,
VeriFone copyright screen.
Hold the red key down through a series of short beeps until the terminal displays
the shutdown verification screen. Keep holding the red key until the V
terminal shuts down.
When the terminal has no power, the screen is blank and the green LED indicator
is not lit.
/V
X
610 I
G
XX
NSTALLATION
UIDE
x
610 to a non-battery power source, the terminal shifts to
QB0106A3
VERIFONE
STAT F4
x
610 Startup Screen
DOWNLOAD NEEDED
appears on screen after the initial
x
610